Train the Trainer
Airframe-specific training for flight instructors: the maneuvers, emergency procedures and instructional techniques for the helicopter you will teach in.
Training delivered in your aircraft, at your location.
Instructor training sits at the heart of what ATACS does, because instructors are the gatekeepers — of both knowledge and of the aircraft itself. Teaching the next generation of instructors to provide safe, effective instruction is one of our core passions.
What sets instructor training apart is that it goes far beyond flying from the left seat and describing a maneuver. A great instructor must anticipate and react to a student’s inaction or wrong action — protecting the aircraft from damage first, and then providing instruction, in that order. That discipline is imperative.
And it’s at the instructor level that the deepest mastery is forged, where the most advanced techniques and maneuvers are taught.
Course overview
Train the Trainer prepares new and experienced flight instructors to teach in a specific helicopter. It covers the aircraft’s systems and every maneuver and emergency procedure in the ATACS syllabus for that airframe, taught from an instructor’s perspective, along with the instructional techniques specific to it. The goal is instructors whose standards hold up long after the course ends.
Who it’s for: new flight instructors preparing to teach in a helicopter type, experienced instructors adding an airframe, and owners, flight schools and operators developing their own instructors. The course can also be tailored to Part 135 instructors and check airmen.
Prerequisites
- A flight instructor certificate with a rotorcraft category and helicopter class rating
- A current medical certificate
At a glance

What the course covers
- The aircraft systems ground school for your airframe, as taught in the ATACS Initial course
- Every normal maneuver and emergency procedure in the ATACS syllabus for that airframe, flown and taught from an instructor’s perspective
- Instructional techniques specific to the airframe
- Optional items from the airframe syllabus, including touchdown autorotations on request
Optional items add time to the course.
Part 135 instructors and check airmen. Train the Trainer can be tailored to Part 135 instructors and check airmen, built around your operation and the airframe you fly. Part 135 training is conducted by experienced Part 135 instructors and check airmen.
“I was in a Train the Trainer course and very new to the 407, learning to be an instructor in it, and he developed me in a few days to where I was doing high hover, zero airspeed, full down autorotations to a point under NVGs.” — Ashley D., HEMS Check Airman (testimonials)
Airframes
Train the Trainer is available for every airframe ATACS teaches. Each course page lists the ground school topics, maneuvers and emergency procedures for that aircraft.
Bell 407
407 Analog, 407GX/GXP and 407GXi. See the ground school topics and maneuver list.
Bell 505
Jet Ranger X. See the ground school topics and maneuver list.
Bell 206B JetRanger
250-C20B or C20J. See the ground school topics and maneuver list.
Bell 206L LongRanger
L-3, L-4 and C30P-upgraded L-1. See the ground school topics and maneuver list.
Robinson R66
With or without HeliSAS. See the ground school topics and maneuver list.
Robinson R44
R44, Raven I and Raven II. See the ground school topics and maneuver list.
Instructor requirements to know
- Make and model time. A flight instructor may not give training required for a certificate or rating in a helicopter without at least 5 hours of pilot in command time in that specific make and model (14 CFR 61.195(f)). Pilot in command time you log as the sole manipulator of the controls during the course can count toward it (14 CFR 61.51(e)(1)(i)).
- Robinson R44. SFAR 73 requires a separate instructor endorsement to give training or flight reviews in the R44. See the SFAR 73 Robinson Instructor Endorsement.
- Night vision goggles. Giving NVG training requires the experience and logbook endorsement in 14 CFR 61.195(k). See the NVG Instructor Endorsement.
What you receive
- ATACS certificate of completion.
- Training progress record. The ground and flight training you completed, documented as you go.
Any ATACS certificate can be verified by its certificate number.

Training in your aircraft, at your location.
Every ATACS course is flown in your helicopter, where you operate it. Each hour of instruction builds proficiency in the exact aircraft, avionics, and configuration you fly.
- No transfer gap. Train in your own cockpit, not a generic fleet aircraft or simulator.
- No travel or ferry time. Instruction comes to your base, on your schedule.
- Built around your operation. One-on-one training shaped around your mission, your terrain, and how you actually use the aircraft.
- Insurance-aligned. Training completed in the make, model, and tail number your policy covers.
Working with your insurance.
ATACS courses are built to OEM-equivalent standards and are accepted by major aviation underwriters. Before training, we’ll send our syllabus and instructor qualifications directly to your broker for review, so your approval is confirmed before we fly.
Related
Ready to schedule?
Send a request with the aircraft, the instructors to be trained, the location and your preferred dates. Pricing is on the pricing page.